Key Takeaways
- Use a proper sound level meter with A-weighting and fast response
- Position it 0.5 m from the exhaust at a 45-degree angle
- Hold the engine at roughly half redline and record the peak dB(A)
- Home tests give reliable guidance but aren’t a substitute for official checks
Measuring your exhaust noise at home is easier than most riders expect. With a basic sound level meter and the right setup, you can get a result that’s close to official MOT and track-day procedures.
This guide explains the correct method so you can check if your exhaust is likely to pass roadside checks or static limits before you ever leave the garage.
What You Need
A simple handheld sound level meter is ideal, preferably one with A-weighting, fast response, and a max/hold function.
You’ll also need a quiet outdoor space free from reflective surfaces and, ideally, a tripod to keep the microphone at exhaust height.
Phone apps can work in a pinch, but even the best ones only approximate a calibrated meter and results vary between devices.
Test Setup
Park your bike on level ground in an open area so nothing around you bounces sound back toward the microphone.
Set the meter at roughly the same height as the exhaust outlet, at least 20 cm off the ground.
Place it 0.5 metres from the outlet at a 45-degree angle to the bike. If your bike has twin outlets close together, measure from the outermost one.
Meter Settings and How to Take the Reading
Set the meter to A-weighting with a fast response and warm it up before testing. If your meter allows calibration, follow the manufacturer’s instructions.
Start the bike and let it reach normal operating temperature.
Raise the revs smoothly to around half of the engine’s redline and hold it steady for at least one second.
Release the throttle and note the maximum dB(A) reading.
Repeat the test several times and average the results, making sure there are no interruptions such as people talking or sudden loud noises.
Using a Phone App Instead
If you only have a phone, use a reputable sound-level app such as NIOSH SLM or one shown in studies to be within a couple of decibels of a calibrated meter.
Follow the exact same positioning and rpm steps. Treat the reading as approximate, since phone microphones vary and can easily be a few decibels out.
How Your Reading Relates to UK Limits
Most EU-type-approved motorcycles over 500 cc fall in the mid-80 dB(A) range for stationary tests, though roadside checks often allow slightly higher levels to account for wear.
UK track days usually set limits around 102–105 dB(A), depending on the circuit. A home test can’t perfectly match official procedures, but using the 0.5 m/45° method with a decent meter will give you a realistic idea of where your bike stands.